Although washing electric blankets can result in some problems, their inability to function correctly after washing due to possibly being overwashed, should not come across as alarming. Here’s how electric blankets should be properly washed to avoid them putting a stop to the work that they were doing.
Read: How to Connect Your Samsung Galaxy Watch Ultra to an iPhone
Why Electric Blankets Fail After Washing:
It is worth noting that electric blankets do contain degree cables. If these are even slightly mishandled or pulled, they become vulnerable. The most common culprits are:
- Wire Damage: Broken or twisted wires encased in the blanket.
- Moisture Residue: Not drying the blanket enough after a washing cycle.
- Controller Issues: Computer systems that control the blanket
- Connector Corrosion: Any rust present on the plug or connector.
How to Fix an Electric Blanket After Washing:
1- Inspect the Blanket for Damage:
- First and foremost, do a thorough inspection of the blanket for any type of damage.
- Flat the blanket and look for bulges, severed wires, or burns. If the garbled wires or severed wires reach a certain threshold then do not proceed any further.
2- Check the Power Cord and Controller:
- Make sure that it’s properly connected. Then carefully look for damage on the controller and also look for blinking lights that might indicate an error. Lastly, try plugging the blanket into some other outlet.
3- Dry the Blanket Thoroughly:
- For air drying the blanket, lay it flat in a drying rack while also making sure that the area is well-ventilated and there is enough circulation. If the manufacturer does allow tumble drying, consider using the low heat setting.
- Do not plug in the thermal blanket without ensuring that it is completely dried.
4- Reset the Blanket (If Applicable):
- Unplug the blanket from the power source. Disconnect the controller leave it for a few minutes and reassemble everything. Plug the blanket’s power cable back into the socket and check if its functions work.
5- Cleaning Connectors and Plugs:
- Examine the connectors because they can be corroded or contaminated with dirt. To wipe them clean, take a dry cloth and gently rub them without applying water or any other cleaning products.
Check Out New Electric Blanket
Common Questions Asked About Electric Blanket Malfunction:
If your electric blanket still doesn’t work after following the above steps, the manufacturer’s customer service or a professionally skilled individual should be contacted. Performing intricate repairs by yourself would not be wise as it may involve the wiring, which can be dangerous if handled improperly.
Prevention Tips:
- Follow Care Instructions: Every time washing and drying, use the instructions provided by the manufacturer respecting their directives.
- Avoid Frequent Washing: Use protective covers for electric blankets, thus preventing the necessity for incessant washing.
- Do Basic Maintenance: Every winter season inspect the blanket thoroughly to check if it has any scratches or damage before using it.
If the thermal blanket was washed and is not functioning, there using these steps might help unclog it Please do keep safety first, when unsure seek a specialist or better replace the blanket.
Leave feedback about this